Charnwood W715 10” Woodworking Bandsaw

• Precision Ground Cast Iron Work Table
• Quick Lock Rip Fence
• Quiet Induction Motor
• Crosscutting Mitre Guide Included
• 4” Cutting Depth Capacity, 10” Cutting Width (Throat)

Please Note: Because this item is bulky and heavy, the Free delivery option does not cover all areas. If you would like delivery to Scottish Highlands, Scottish Isles, Isle of Man, Isle of Wight, Channel Islands or Northern Ireland, please contact us before ordering on 01530 516926

Maximum cutting depth 100mm

Throat width 250mm

Table size 340mm x 335mm

Table tilt 0-45

Cutting speed 800m/min

Motor (induction) 375w

Blade length 1712mm

Blade widths 6-12mm (1/4″ – 1/2″)

A small sized woodworking bandsaw with a durable precision ground cast iron tilting table with a stop for returning to 90 degrees after a bevel cut and two mitre fence slots. The quick release fence locks onto both front and rear of the table to provide a rigid straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting wood at any angle. The new rack & pinion blade guard design can be adjusted single handed using a dial on the side of the machine and is fitted with a scale to set the cutting height. Two side guide bearings and a rear thrust bearing on the end of the guard, control the bandsaw blade and keep it true. Finished off with a durable powder coated paint finish.

Supplied with rip fence, mitre fence adjustable 60 degrees each way, 3/8″ woodcutting blade, NVR switch, 60mm diameter extraction outlet, cable and plug.