Cutting-Edge Veritas Bevel-Up Jointer Fence

Cutting-Edge Veritas Bevel-Up Jointer Fence
  • Veritas Bevel-Up Jointer Fence
  • Part of an Award Winning Tool Range
  • Made to the Highest Standards
  • UK Safety Spec

The Veritas low angle jointer fence enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer. The 280mm(11″) long anodised aluminium fence can be attached to either side of the plane with the brass thumbscrews provided. A set screw can be adjusted to square the fence to the sole. As supplied, the 50mm(2″) tall guiding face can be used to plane edges perfectly square to the face of your workpiece. It can also be used to shoot angles less than 90° when a bevelled wooden guide is attached to the inside face of the fence..

Lowest Price: £98.52
Buy from Amazon


Advanced Build Quality Veritas Bevel-Up Jointer Plane —

Advanced Build Quality Veritas Bevel-Up Jointer Plane --
  • Veritas Bevel-Up Jointer Plane A2 Blade
  • Part of an Award Winning Tool Range
  • Made to the Highest Standards
  • Veritas Bevel-Up Jointer Plane
  • UK Safety Spec

The Veritas low-angle jointer is the largest member of the bevel-up bench plane family. At 560 x 73mm(22″ x 2.7/8″) and weighing 3.4kg (7.1/2 lb.), it is the answer for jointing edges and flattening large panels. The bevel-up blade configuration results in a plane that is versatile and straightforward to use. The 12° bed angle, coupled with the 25° blade bevel, creates an effective cutting angle of 37°. Simply increasing the blade bevel results in higher cutting angles for improved performance in more difficult-grained woods. An adjustable throat plate allows a wide range of mouth adjustment. A unique stop-screw retains mouth settings while preventing blade damage when removing and replacing blades. Supplied with a 57mm(2.1/4″) wide lapped blade, 4.75mm(3/16″) thick in A2 tool steel (other blades are available as optional extras). A2 blades are air-quenched and double tempered to a hardness of Rc60-62. They hold an edge longer than most high-carbon steel blades, but take a little more effort to sharpen. A2 offers the most durable edge. O1 blades are oil-quenched and double tempered to Rc58-60. They are easier and quicker to sharpen than an A2 blade, but tend to dull a little faster. The chromium content of O1 is less than that of A2 steel (0.5% rather than 5%) so they are more prone to rust. O1 blades are a good choice for rapid honing, but at a higher frequency..

Lowest Price: £667.80
Buy from Amazon