Charnwood W619 8″ Cast Iron Table Saw with Sliding Carriage

Charnwood W619 8
  • Quiet Induction Motor
  • Cast Iron Precision Ground Table
  • Sliding Carriage as Standard Equipment
  • Extension Tables as Standard Equipment
  • Solid Floorstand Base Included

Please Note: Because this item is bulky and heavy, the Free delivery option does not cover all areas. If you would like delivery to Scottish Highlands, Scottish Isles, Isle of Man, Isle of Wight, Channel Islands or Northern Ireland, please contact us before ordering on 01530 516926

A compact, high quality table saw with a quiet induction motor. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a joy to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts.
Supplied with 18 tooth TCT sawblade, sliding carriage, extension tables, floorstand, adjustable feet, cable and plug.

Specification
Main Table Size 530mm x 1000mm
Maximum Ripping Width Using Fence 720mm
Crosscut Table Size 400mm x 180mm
Maximum Crosscutting Width 600mm (700mm Using Reverse Table)
Blade Tilt 90 – 45 degrees
Cutting Depth at 90 degrees 60mm
Cutting Depth at 45 degrees 47mm
Blade Diameter 200mm
Blade Bore 30mm
Work Table Height 910mm
Motor (induction) 1100w (1.5hp) / 240v
No-Load Blade Speed 4700 rpm
Dimensions (WxDxH) 1460mm x 1010mm x 1030mm
Weight 90Kg
Rating: Light Trade
Warranty 1 Year

It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips. The hose kit supplied collects dust from the saw guard and takes it to the single 100mm diameter hose connection point at the back of the machine.

Lowest Price: £575.00
Buy from Amazon


Charnwood 100/35RC 5 Piece Stepped Reducer

Charnwood 100/35RC 5 Piece Stepped Reducer
  • Reducing Coupling From 100mm to 35mm Diameter
  • Used For Stepping Up Or Down In Hose Sizes
  • Used For Connecting 100mm Hose to Bench Top Machinery With 35mm Outlet
  • Wood Working Dust Extraction Accessory
  • Made From A Tough Plastic

Please Note: Because this item is bulky and heavy, the Free delivery option does not cover all areas. If you would like delivery to Scottish Highlands, Scottish Isles, Isle of Man, Isle of Wight, Channel Islands or Northern Ireland, please contact us before ordering on 01530 516926

Universal reducing coupling. This Reducer consists of 4 pieces which can be joined and used as a single reducer or split to give a variety of options. The fittings are all tapered so a couple of millimetres each way should be OK to give decent fit.
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet. The table below shows the outside diameter, OD, and the inside diameter, ID, for each end of the connector, in the various stages.

Outside Diameter / Inside Diameter
Step 1 From 100mm / 96mm To 68mm / 62mm
Step 2 From 100mm / 96mm To 45mm / 40mm
Step 3 From 100mm / 96mm To 40mm / 34mm
Step 4 From 100mm / 96mm To 35mm / 28mm

A hose clamp should be used to fasten hose to the reducer.

Lowest Price: £12.50
Buy from Amazon


Charnwood BG200 8″ Bench Grinder

Charnwood BG200 8
  • Quiet Induction Motor 370w
  • 8” Aluminium Oxide Grey Grinding Wheel
  • 8″ Fine White Grinding Wheel
  • Integral Auto Switching Lights
  • Adjustable Tables

Please Note: Because this item is bulky and heavy, the Free delivery option does not cover all areas. If you would like delivery to Scottish Highlands, Scottish Isles, Isle of Man, Isle of Wight, Channel Islands or Northern Ireland, please contact us before ordering on 01530 516926

8” Double Bench Grinder and Chisel Sharpener.
A sturdy bench top sharpener with a cast iron base and a smooth induction motor. The grinder sits on 4 rubber feet which can be removed to bolt it down to a work bench. An integral work light fitted above each wheel ensures that the work area is well lit at all times. For doing close up work one of the perspex guards doubles as a 3 times magnifier to make life easier for the operator.
One end of the grinder is fitted with a coarse Aluminium Oxide grey stone for fast removal of material. Perfect if you get a chipped chisel tip and need to remove a lot of material.
The other end has a white stone which is used for sharpening heat sensitive tools such as High Speed Steel (HSS). The white stone is used for sharpening woodturning chisels.
Each wheel is fitted with an adjustable metal tool rest which can be tilted to various angles and can also be set close to the wheel. The left hand tool rest also has a groove set into the top at 30 degrees for sharpening drill bits.
Supplied with spark guards, 1.75m cable and plug.

Specification
Motor (Induction) 370w
Voltage 240v
No Load Speed 2850rpm
Spindle Diameter 5/8″ (15.88mm)
Wheel Diameter 8″ (200mm)
Wheel Width 25mm
Dimensions (WxDxH) 380mm x 300mm x 300mm
Weight 17kg
Rating Hobby
Warranty 1 Year

Lowest Price: £91.99
Buy from Amazon